Home > High Temperature Box Furnace >

Labratory Electric High Temperature Box Furnace 900Ordm C For Melting

Product Categories

Hefei Chitherm Equipment Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Labratory Electric High Temperature Box Furnace 900Ordm C For Melting

Name: Labratory Electric High Temperature Box Furnace 900Ordm C For Melting
Brand: Chitherm
Price: 1 USD

Buy cheap Labratory Electric High Temperature Box Furnace 900Ordm C For Melting product

Model Number : MBF60-10

Range of Applications : Industrial

Type : Electric Holding Furnace

Usage : Ceramic Sintering

Fuel : Electric

Atmosphere : Air/O2

Effective Chamber Dimensions : 350*300*550mm(W*H*D)

Heating Method : Fec Heater

Transport Package : Wooden Packaging

Specification : 860*1750*1220mm

Trademark : Chitherm

Origin : China

HS Code : 8514101000

Supply Ability : Customized

Customization : Available

Certification : ISO

Place Style : Vertical

Place of Origin : China

Brand Name : Chitherm

MOQ : 1

Price : Negotiable

Packaging Details : Customized

Delivery Time : Customized

Payment Terms : Customized

Contact Now

Vertical Place Style Electric Holding Furnace 900 ordm C Mbf60-10 Melting Labratory Furnace

Application Fields:

Mainly used for high-temperature heat treatment processes of similar products such as electronic devices and electronic ceramics.
The use of FEC (Fiberglass Epoxy Composite) ceramic fiber heating plates provides resistance to acids and alkalis, excellent uniformity, and simple operation. It is suitable for use in various laboratories and small batch production processes.

Technical Specifications and Basic Configuration

1. Rated Temperature: 900°C;
2. Maximum Temperature: 1000°C;
3. Inner Lining Material: Fused Quartz;
4. Effective Dimensions: 350 ×300 × 550mm (W × H × D);
5. Heating Rate: ≤10°C/min;
6. Heating Elements: FEC ceramic fiber heating plates, heating from all four sides;
7. Temperature Stability: ±1°C, with PID parameter self-tuning function;
8. Temperature Uniformity: ±5°C (tested with an empty furnace at constant temperature of 900°C);
9. Thermocouple Type: K-type;
10. Number of Temperature Control Points: 1 point;
11. Number of Temperature Control Segments: 9 segments;
12. Exhaust Chimney: Equipped with an exhaust port at the rear, which can be manually adjusted;
13. Inlet Design: Allows the introduction of dry, clean, oil-free compressed air or oxygen into the furnace chamber, with the inlet flow controlled by a glass rotameter, measuring range 10-100LPM;
14. Alarm Protection: Over-temperature, open circuit, etc., with audible and visual alarm protection, and over-temperature alarm power-off protection function;
15. Maximum Heating Power: 16 kW;
16 .Typical Insulation Power for an Empty Furnace: ≤8 kW;
17 .Surface Temperature Rise: <35°C;

Labratory Electric High Temperature Box Furnace 900Ordm C For Melting

Delivery List
	Item	Note	QTY
Basic Compositions	Furnace		1 PC
	Certificates of Inspection	Furnace and major purchased components	1 Set
	Technical Documents	Furnace specifications, technical documents of major purchased components, etc	1 Set
Key Parts	FEC Heater		1 Set
	Temperature Controller		1 PC
	quartz glass		1 Set
Spares	SSR		1 PC

Facility Requirements
1. Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
2. Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m³ /h.
3. Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
4. Ground requirements: level, no obvious vibration, bearing capacity > 250Kg/m².
5. Power conditions: capacity greater than 22kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
6. Installation site: 1800mm×1850mm×3000mm (W×H×D), installation area greater than 3.5m².

Labratory Electric High Temperature Box Furnace 900Ordm C For Melting

Product Tags: