Max Vacuum Level 8PA Industrial Laboratory Furnace Vbf1200-02 High Vacuum System Oven Furnace for Industrial Applications
Typical applications:
Primarily used for vacuum heating degassing of the coupler housing and suppression of air oxidation.
Parameter characteristics: 1. Product Model: Non-standard Customization
2 Operating Temperature: RT ~ 200°C
3. Maximum Temperature: 200°C
4. Furnace Cavity Dimensions: 900×1000×1600mm (W×H×D)
5. Heating Element: Ceramic Fiber Heating Plate
6. Controlled Atmosphere: 1 channel of nitrogen
7. Temperature Control Accuracy: ±1°C
8. Control Mode: Imported temperature controller with PID parameter auto-tuning
9. Number of Temperature Control Points: 3 points (front, middle, and rear)
10. Number of Temperature Measurement Points: 8 SMD thermocouples
11.Vacuum Detection: Vacuum gauge tube and vacuum gauge for supporting detection
12. Alarm and Protection: Over-temperature, broken thermocouple, vacuum pump overload, low pressure, under-reverse phase, etc. audio-visual alarm protection
13. Design Power: ~12kW
14. Power Supply: Three-phase five-wire, 380/220VAC, 50Hz
15. Equipment Weight: ~1200Kg
16.Overall Dimensions: 1690mm×1550mm×2290mm (W×H×D). Table One: Delivery Checklist
| Name | Main Content | Quantity | |
| Basic Components | Kiln main body | | 1 unit |
| Inspection certificate | Certificate of conformity for each major purchased component | 1 set |
| Technical documents | Instruction manual, technical documents for each major purchased component, etc. | 1 set |
| Key Components | Heating element | Ceramic fiber heating plate | 1 set |
| Touchscreen | 10-inch touchscreen | 1 unit |
| Temperature controller | Yokogawa temperature controller | 1 unit |
| Screw pump | BaoSi GSD120 B screw pump | 1 unit |
| SMD thermocouples | | 8 sets |
| Spare Parts | SMD thermocouples | | 2 sets |
Normal Operating Conditions of the Equipment
1 Environmental Conditions: Temperature 0 - 40°C, humidity ≤ 80% RH, no corrosive gases, and no strong air flow disturbances.
2 Floor Requirements: Level, without obvious vibration, with a bearing capacity > 500 Kg/m².
3 Power Conditions: Capacity greater than 24 kVA, three-phase five-wire system, voltage 220/380 V, frequency 50 Hz. Live wire: yellow, green, red; neutral wire: blue; earth wire: yellow-green.
4 Installation Site: 2500 mm × 3000 mm × 3000 mm (W × H × D), with an installation area greater than 8 m².
