Electric Holding Furnace Htf1540-0311nh Tube Furnace Phi 150 times 2100mm Quartz for Customization
Typical Applications:
High-temperature sintering and heat treatment processes for glass insulators, ferrosilicon sheets, and similar products; also applicable to sintering processes of metal-cased dielectric ceramics under binary atmospheres.
Parameters and Features:
1.Rated temperature: 1000ºC;
2. Furnace tube dimensions: Φ150 × 2100 mm;
3.Number of temperature zones: 3;
4. Heating via FEC vacuum-formed ceramic fiber heaters with surrounding heating;
5.Single-zone and multi-zone designs with independent temperature control.
6.Flow Meter Range: Nitrogen 10-100LPM; Hydrogen 1-10LPM;
7.Alarm Protection: Audible & visual alarms for overtemperature, broken thermocouple, low pressure, etc., with overtemperature alarm and heating cutoff protection;
8.Maximum Heating Power: 15kW;
9.Idle Furnace Heat Preservation Power: ≤7.5kW;
10.Surface Temperature Rise: ≤35ºC;
11.Equipment Weight: Approx. 500Kg;
12.Equipment Exterior Color: Light Gray;
13.Dimensions: 880×1370×2500mm (W×H×D).
| Delivery Checklist |
| | Name | Main Contents | Quantity |
| Basic Components | Furnace Main Uni | | 1 unit |
| Inspection Certificates | Certificates for key purchased components | 1 set |
| Technical Documents | User manual, technical documents for key purchased components, etc. | 1 set |
| Key Components | FEC Heater | | 1 set |
| Temperature Controller | Shimaden SRS11 | 3 unit |
| Quartz furnace tube | Φ150×2100mm | 1 set |
| Spare Parts | Solid-State Relay (SSR) | | 1 piece |
| Heater | | 1 set |
| Graphite plate | 100×100×6mm | 3 piece |
Operating Conditions:
1.Environmental Conditions: Temperature 0-40ºC, Humidity ≤80% RH, no corrosive gases, no strong airflow disturbance;
2.Gas Supply Requirements:Nitrogen: 0.1-0.3 MPa, 99.999% high-purity nitrogen gas, consumption approx. 3-6 m³/h;Hydrogen: 0.1-0.3 MPa, consumption approx. 0.3-0.6 m³/h;
3.Water Supply Requirements: 0.1-0.3 MPa, flow rate 1-3 L/min;
4.Ventilation System: Non-contact exhaust system, exhaust capacity >7 m³/h;
5.Floor Requirements: Level, no significant vibration, load-bearing capacity >300 kg/m²;
6.Power Supply: Capacity >20 kVA, 3-phase 5-wire, voltage 220/380 V, frequency 50 Hz. Live wires: Yellow, Green, Red; Neutral wire: Blue; Ground wire: Yellow-green;
7.Installation Space: 3000×3000×4400 mm (W×H×D), installation area >9 m².
