Model and Applicability
Model: HBF105-14 Sintering Furnace
Features: Acid and alkali resistant, excellent temperature uniformity, easy operation, suitable for laboratories and small-scale production.
Temperature Performance
Operating Temperature: 1300°C (standard)
Maximum Test Temperature: 1500°C (short-term limit)
Temperature Stability: ±1°C
Furnace Temperature Uniformity: ±5°C
Furnace Chamber and Heating System
Effective Chamber Size: 400×330×800mm (W×H×D)
Heating Elements: Silicon molybdenum rods (high-temperature resistant, oxidation-resistant)
Loading Device: Corundum mullite loading plate (high-temperature resistant, excellent chemical stability)
Safety and Protection
Alarm System: Over-temperature, thermocouple break, low-pressure audible and visual alarms; heating and door switch interlock (anti-misoperation).
Surface Temperature Rise: <35°C (safety protection design).
Power and Power Consumption
Power Requirements: Three-phase 380VAC, 50Hz, 30kVA
Maximum Heating Power: 23kW
Equipment Weight: 500kg
Installation and Dimensions
Installation Dimensions: 800×900×1200mm (D×W×H)
II. Heating/Cooling Control Cabinet Configuration
Temperature Control Channels
Total Channels: 5+2 (5 channels for sintering furnace, 2 backup channels).
Temperature Controllers
Brand: Eurotherm 3504 or imported from Japan (high-precision intelligent regulator).
Quantity: 7 temperature controllers per control cabinet.
Physical Parameters
Dimensions: 800×1850×500mm (W×H×D)
Color: Light gray (industrial standard color scheme).
III. Control System Functions
Control Method
Power and voltage regulation control (precise adjustment of power and voltage for stable heating/cooling).
Intelligent Protection
PID parameter self-tuning (automatically optimizes temperature curve).
Multiple protections including high-temperature upper limit alarm and thermocouple failure indication.
Over-temperature response: Audible and visual alarm + immediate power cutoff.
IV. Application Scenarios
Laboratory: Material sintering, heat treatment experiments.
Small-Scale Production: High-temperature processes such as electronic ceramics and metal powder metallurgy.
| Item | pecifications | Quantity | Notes |
| Kiln Main Unit | Primary heating system | 1 set | Core equipment for thermal process
|
| Setter Plate | Material: Corundum-Mullite | 1 set | High-temperature resistant carrier |
- The equipment must be installed indoors, with an ambient temperature range of -10℃ to 45℃. The indoor environment must be free of flammable gases, corrosive gases, and vapors.
- The equipment requires a floor space of no less than 4 square meters, with a working area length of at least 2 meters, width of at least 2 meters, and height of no less than 3 meters. The foundation must be sturdy and level, and the furnace weighs approximately 400kg.
- The power supply for this furnace must be a three-phase five-wire AC power line, with a voltage of 380±10% V and a frequency of 50±2% Hz. This power line is dedicated, and high-power conversion equipment such as welding machines, electric furnaces, and metal-cutting machine tools should not be connected to this distribution.
- The equipment must be reliably grounded.
