1.Application field
It is suitable for medium-temperature heat treatment of electronic products, including nitrogen/hydrogen atmosphere heat treatment for electronic ceramics, media, and conductors, etc.
It is suitable for medium-tem temperature heat treatment of electronic products, including medium-temperature heat treatment for electronic ceramics, media and conductors in nitrogen/hydrogen atmosphere, etc.
2. Technical Specification: Model Number: HWF100-10NH
The dimensions of the tank are 630 × 900 (d × D).
The effective dimensions of the furnace chamber are 400 × 400 × 650 mm (W × H × D).
Maximum operating temperature: 1000°C
Long-term working temperature: 900°C
Heating method: FEC ceramic fiber heater
Refractory thermal insulation, alumina products
Cooling method: in-furnace cooling
Number of temperature control points: Three independent temperature control points at the front, middle, and rear.
Temperature control instrument: Japanese YAMATA intelligent temperature controller
Number of program segments: 9
Operating power supply: 380±10%V power supply, 3-phase 5-wire, 50Hz
Maximum power: 30kW
Thermal insulation power: ≤15kW
3. Delivery List
| Table 1 Delivery list |
| Item | Note | Qty. |
| Basic Components | Furnace |
| 1 SET |
| inspection certificate | Certificate of major outsourced components | 1 SET |
| Technical Documents | Instructions, technical documents of the major outsourced parts, etc | 1 SET |
| Key Components | micro-oxygen analyzer |
| 1 SET |
| Temperature Controller |
| 1 SET |
| Thermocouple | Type K | 3 PCs |
| Spare Parts | SSR |
| 1 PC |
4. Facility Requirements - Environmental Conditions: temp.: 0~40ºC, humidity ≤ 80%RH, no corrosive gas, no strong airflow disturbance
- N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m3/h
- H2 Conditions: working pressure: 0.2-0.4MPa, Max gas consumption 0.2-0.6m3/h
- Water Conditions: clean, no corrosive water, working pressure 0.1-0.3MPa, 1-3L/min
- Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 10m3/h
- Ground Requirements: horizontal, no obvious vibration, load-bearing> 500 kg/m2;
- Power Condition(TBD): capacity > 40kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green;
- Installation Site: 3200mm×2500mm×3000mm(D×W×H), with an installation area greater than 8m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
